收藏本站
RClamp0502A
PROTECTION PRODUCTS
Applications Information
Device Connection Options for Protection of Two
High-Speed Data Lines
This device is designed to protect data lines by
clamping them to a fixed reference. When the voltage
on the protected line exceeds the reference voltage
the steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 1 & 6 and pins 3 & 4.
Pins 5 and 2 can be connected to ground or Vcc based
on application and location of those connections. The
connection to ground should be made directly to a
ground plane. The path length should also be kept as
short as possible to minimize parasitic inductance.
Figure 1 shows the layout configuration to send data
input at pins 6 and 4 and output at pins 1 and 3.
This device is designed for ease of PCB layout by
allowing the traces run straight through the device.
Figure 2 shows the proper way to design the PCB
board trace in order to use the flow through layout for
two line pairs. The solid line represents the PCB trace.
Note the PCB traces are used to connect the pin pairs
for each I/O (pin 1 to pin 6 and pins 3 to pin 4). For
example, I/O 1 enters at pin 6 and exits at pin 1 and
the PCB trace connects pins 6 and 1 together. This is
also true for I/O 2. The negative reference (Gnd) is
Figure 1. Protection of Two Data Lines
and One Power Supply Line
Figure 2. Flow Through Layout for
Two Data Lines and one Power Line
Figure 3. USB 2.0 (up to 480Mbps)
Upstream or Downstream Port Protection
connected at pin 2. The positive reference is
connected at pin 5.
Universal Serial Bus ESD Protection
The RClamp0502A may also be used to protect both
upstream and downstream USB ports on monitors,
D+
to protected Circuit
Gnd
D-
to protected Circuit
1
2
3
6
5
4
D+
Vcc
D-
computers, peripherals or portable systems. Each
device will protect up to one USB port (Figure 3). When
the voltage on the data lines exceed the bus voltage
(plus one diode drop), the internal rectifiers are
forward biased conducting the transient current away
from the protected controller chip. The TVS diode
directs the surge to ground. The TVS diode also acts
to suppress ESD strikes directly on the voltage bus.
Thus, both power and data pins are protected with a
single device.
? 2008 Semtech Corp.
5
www.semtech.com
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
RCLAMP0502B.TCT IC TVS ARRAY 2-LINE 5V SC-75
RCLAMP0502BA.TCT TVS
RCLAMP0502N.TCT TVS ARRAY SLP1210N6 6-PIN
RCLAMP0504F.TCT IC TVS ARRAY 4-LINE 5V SC70-6
RCLAMP0504FA.TCT TVS
RCLAMP0504M.TBT IC TVS ARRAY 4-LINE 5V 10MSOP
RCLAMP0504N.TCT IC TVS ARRAY 4-LINE 5V 6-SLP
RCLAMP0504P.TCT IC TVS ARRAY 4-LINE 5V SLP1616P6
相关代理商/技术参数
RCLAMP0502B 制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:Ultra-Low Capacitance TVS for ESD and CDE Protection
RCLAMP0502B.TCT 功能描述:IC TVS ARRAY 2-LINE 5V SC-75 RoHS:是 类别:过电压，电流，温度装置 >> TVS - 二极管 系列:RailClamp® 产品目录绘图:SMB 600 Watt Top SMB 600 Watt Side 1 SMB 600 Watt Side 2 标准包装:10 系列:- 电压 - 反向隔离（标准值）:25.6V 电压 - 击穿:28.5V 功率（瓦特）:600W 电极标记:单向 安装类型:表面贴装 封装/外壳:DO-214AA，SMB 供应商设备封装:SMB 包装:剪切带 (CT) 产品目录页面:2386 (CN2011-ZH PDF) 其它名称:P6SMB30AT3GOSCT
RCLAMP0502B.TCT 制造商:Semtech Corporation 功能描述:TVS Diode
RCLAMP0502B.TCT-CUT TAPE 制造商:SEMTECH 功能描述:RCLAMP Series 25 V 0.5 pF Uni-Directional Ultra-Low Capacitance TVS Diode Array
RCLAMP0502BA 制造商:SEMTECH 制造商全称:Semtech Corporation 功能描述:Ultra-Low Capacitance TVS for ESD and CDE Protection
RCLAMP0502BA.TCT 功能描述:TVS RoHS:是 类别:过电压，电流，温度装置 >> TVS - 二极管 系列:RailClamp® 产品目录绘图:SMB 600 Watt Top SMB 600 Watt Side 1 SMB 600 Watt Side 2 标准包装:10 系列:- 电压 - 反向隔离（标准值）:25.6V 电压 - 击穿:28.5V 功率（瓦特）:600W 电极标记:单向 安装类型:表面贴装 封装/外壳:DO-214AA，SMB 供应商设备封装:SMB 包装:剪切带 (CT) 产品目录页面:2386 (CN2011-ZH PDF) 其它名称:P6SMB30AT3GOSCT
RCLAMP0502BATCT 制造商:Semtech Corporation 功能描述:ESD Suppressor TVS 18KV 3-Pin SOT-523 T/R 制造商:Semtech Corporation 功能描述:TVS 制造商:SEMTECH 功能描述:I.C.
RCLAMP0502N 制造商:未知厂家 制造商全称:未知厂家 功能描述:Low Capacitance TVS Diode Array